FileCheckDesc=This tool allows you to check the integrity of files and the setup of your application, comparing each file with the official one. The value of some setup constants may also be checked. You can use this tool to determine if any files have been modified (e.g by a hacker).
ConfirmLockNewSessions=Da li ste sigurni da želite da ograničite nove Dolibarr veze na samo vašu? Samo korisnik <b>%s</b> će moći da se poveže nakon toga.
NoSessionFound=Izgleda da vaša PHP konfiguracija ne dozvoljava listanje aktivnih sesija. Direktorijum koji se koristi za snimanje sesija (<b>%s</b>) je možda zaštićen (na primer OS dozvolama ili PHP direktivama open_basedir).
DBStoringCharset=Karakter set baze za čuvanje podataka
DBSortingCharset=Karakter set baze za sortiranje podataka
WarningModuleNotActive=Modul <b>%s</b> mora biti omogućen
WarningOnlyPermissionOfActivatedModules=Ovde se pokazuju samo dozvole u vezi sa aktiviranim modulima. Možete aktivirati druge module u Početna->Podešavanja->Moduli.
DolibarrSetup=Dolibarr instalacija ili nadogradnja
DisableJavascriptNote=Note: For test or debug purpose only. For optimization for blind person or text browsers, you may prefer to use the setup on the profile of user
UseSearchToSelectCompanyTooltip=Also if you have a large number of third parties (> 100 000), you can increase speed by setting constant COMPANY_DONOTSEARCH_ANYWHERE to 1 in Setup->Other. Search will then be limited to start of string.
UseSearchToSelectContactTooltip=Also if you have a large number of third parties (> 100 000), you can increase speed by setting constant CONTACT_DONOTSEARCH_ANYWHERE to 1 in Setup->Other. Search will then be limited to start of string.
DelaiedFullListToSelectCompany=Wait until a key is pressed before loading content of Third Parties combo list.<br>This may increase performance if you have a large number of third parties, but it is less convenient.
DelaiedFullListToSelectContact=Wait until a key is pressed before loading content of Contact combo list.<br>This may increase performance if you have a large number of contacts, but it is less convenient.
TZHasNoEffect=Dates are stored and returned by database server as if they were kept as submitted string. The timezone has effect only when using the UNIX_TIMESTAMP function (that should not be used by Dolibarr, so database TZ should have no effect, even if changed after data was entered).
MustBeLowerThanPHPLimit=Pažnja: vaša PHP konfiguracija trenutno ograničava maksimalnu veličinu fajla za upload na<b>%s</b>%s, nezavisno od vrednosti ovog parametra
NoMaxSizeByPHPLimit=Pažnja: nije postavljen limit u vašoj PHP konfiguraciji
MaxSizeForUploadedFiles=Maksimalna veličina za uploadovane fajlove (0 da bi onemogućili bilo kakav upload)
UseCaptchaCode=Koristiti grafički kod (CAPTCHA) na strani za prijavu i nekim javnim stranama
AntiVirusCommand=Puna putanja za antivirusnu komandu
AntiVirusCommandExample=Primer za ClamAv Daemon (zahteva clamav-daemon): /usr/bin/clamdscan<br>Primer za ClamWin (veoma veoma sporo): c:\\Progra~1\\ClamWin\\bin\\clamscan.exe
AntiVirusParam= Više parametara na komandnoj liniji
AntiVirusParamExample=Primer za ClamAv Daemon: --fdpass<br>Primer za ClamWin: --database="C:\\Program Files (x86)\\ClamWin\\lib"
YouCanEditPHPTZ=To set a different PHP timezone (not required), you can try to add a .htaccess file with a line like this "SetEnv TZ Europe/Paris"
HoursOnThisPageAreOnServerTZ=Warning, in contrary of other screens, hours on this page are not in your local timezone, but of the timezone of the server.
MenusDesc=Menadžer menija postavlja sadržaj dve trake menija (horizontalnu i vertikalnu).
MenusEditorDesc=Editor menija vam dozvoljava da definišete prilagođene unose menija. Koristite ih pažljivo da bi izbegli nestabilnost i trajnu nedostupnost unosa menija. <br> Neki moduli dodaju unose menija (u meni <b> Svi </b> uglavnom). Ako uklonite neki od ovih unosa greškom, možete ih povratiti tako što ćete prvo onemogućiti pa onda omogućiti modul.
SystemToolsAreaDesc=Ova oblast omogućava administrativne funkcije. Koristite meni da bi odabrali tražene mogućnosti-
Purge=Čišćenje
PurgeAreaDesc=Ova strana vam dozvoljava da obrišete sve fajlove generisane ili sačuvane od strane Dolibarr (privremeni fajlovi ili svi fajlovi u <b>%s</b> folderu). Korišćenje ove funkcije normalno nije potrebno. Omogućena je kao pomoć za korisnike kojima je Dolibarr hostovan kod provajdera koji ne nudi dozvole za brisanje fajlova generisanih od strane web servera.
PurgeDeleteLogFile=Brisanje log fajla, uključujući <b>%s</b> definisano za Syslog modul (bez rizika od gubljenja podataka)
PurgeDeleteTemporaryFiles=Obrisati sve logove i privremene fajlove (bez rizika za gubljenje podataka). Parametri mogu biti 'tempfilesold', 'logfiles' ili oba 'tempfilesold+logfiles'. Pažnja: Brisanje privremenih fajlova se radi samo ako je temp folder napravljen pre više od 24 sata.
PurgeDeleteAllFilesInDocumentsDir=Brisanje svih fajlova u folderu: <b>%s</b>.<br>Ovo će obrisati sva generisana dokumenta, u vezi sa elementima (treće strane, računi i sl...), fajlove uploadovane na ECM module, otpaci bekapa baze podataka i privremenih fajlova.
PurgeRunNow=Očistiti sada
PurgeNothingToDelete=Nema foldera ili fajlova za brisanje
PurgeNDirectoriesDeleted=<b>%s</b> fajlovi ili direktorijumi obrisani.
PurgeAuditEvents=Očistiti sve bezbednosne događaje
ConfirmPurgeAuditEvents=Da li ste sigurni da želite da očistite sve bezbednosne događaje? Svi bezbednosni logovi će biti obrisani, ostali podaci neće biti obrisani.
GenerateBackup=Generisanje rezervne kopije
Backup=Rezervna kopija
Restore=Vraćanje sačuvane rezervne kopije
RunCommandSummary=Pravljenje rezervne kopije je pokrenuto sledećom komandom
ToBuildBackupFileClickHere=Da bi se generisao fajl rezervne kopije, kliknite <a href="%s">ovde</a>.
ImportMySqlDesc=Da bi uvezli MySQL fajl rezervne kopije, možete koristiti phpMyAdmin preko vašeg hostinga ili koristiti mysql komandu iz Komandne linije <br>Na primer:
ImportPostgreSqlDesc=Da izvezete fajl rezervne kopije, morate koristiti pg_restore komandu iz komandne linije:
BoxesDesc=Widžeti su komponente koje pokazuju neke informacije koje možete dodati da bi prilagodili neke strane. Možete odabrati između prikazivanja vidžeta ili ne tako što ćete otvoriti ciljnu stranicu i kliknuti 'Aktiviranje', ili klikom na kantu za smeće kako bi je onemogućili
OnlyActiveElementsAreShown=Prikazani su samo elementi iz <a href="%s">omogućenih modula</a> .
ModulesDesc=Moduli/Aplikacije određuju koje funkcionalnosti su omogućene u softveru. Neki moduli zahtevaju dozvole za korisnike nakon aktiviranja modula. Kliknuti na uklj/isklj dugme <span class="small valignmiddle">%s</span> svakog modula da bi se omogućo ili onemogućio modul/aplikacija.
ModulesDeployDesc=If permissions on your file system allow it, you can use this tool to deploy an external module. The module will then be visible on the tab <strong>%s</strong>.
ModulesDevelopDesc=You may also develop your own module or find a partner to develop one for you.
DOLISTOREdescriptionLong=Instead of switching on <a href="https://www.dolistore.com">www.dolistore.com</a> web site to find an external module, you can use this embedded tool that will perform the search on the external market place for you (may be slow, need an internet access)...
DoliPartnersDesc=List of companies providing custom-developed modules or features.<br>Note: since Dolibarr is an open source application, <i>anyone</i> experienced in PHP programming should be able to develop a module.
DoNotStoreClearPassword=Kriptovanje šifri sačuvanih u bazi podataka (NE kao običan tekst). Strogo se preporučuje da se aktivira ova opcija.
MainDbPasswordFileConfEncrypted=Šifra kriptovane baze podataka sačuvana u conf.php. Strogo se preporučuje da se aktivira ova opcija.
InstrucToEncodePass=Da bi se šifra kodirala u <b>conf.php</b> fajl, zameniti liniju <br><b>$dolibarr_main_db_pass="...";</b><br>sa<br><b>$dolibarr_main_db_pass="crypted:%s";</b>
InstrucToClearPass=Da bi se šifra dekodirala (čisto) u <b>conf.php</b> fajlu, zamenite liniju <br><b>$dolibarr_main_db_pass="crypted:...";</b><br>sa<br><b>$dolibarr_main_db_pass="%s";</b>
ProtectAndEncryptPdfFiles=Zaštita generisanih PDF fajlova. Ovo NIJE preporučeno jer zaustavlja grupno generisanje PDF fajlova.
ProtectAndEncryptPdfFilesDesc=Zaštita PDF dokumenta zadržava mogućnost čitanja i pisanja sa bilo kojim PDF čitačem. Ipak, menjanje i kopiranje više nije moguće. Obratite pažnju da korišćenje ove funkcije sprečava generisanje globalno spojenih PDF fajlova.
EMailsSenderProfileDesc=You can keep this section empty. If you enter some emails here, they will be added to the list of possible senders into the combobox when your write a new email.
SubmitTranslation=Ako prevod ovog jezika nije kompletan ili ako pronađete greške, možete ih ispraviti editovanjem fajlova u folderu <b>langs/%s</b> i dostaviti svoje ispravke na www.transifex.com/dolibarr-association/dolibarr/
SubmitTranslationENUS=If translation for this language is not complete or you find errors, you can correct this by editing files into directory <b>langs/%s</b> and submit modified files on dolibarr.org/forum or, if you are a developer, with a PR on github.com/Dolibarr/dolibarr
UnpackPackageInModulesRoot=To deploy/install an external module, you must unpack/unzip the archive file into the server directory dedicated to external modules:<br><b>%s</b>
SetupIsReadyForUse=Instaliranje modula je završeno. Morate ipak omogućiti i postaviti vrednosti za modul u svojoj aplikaciji tako što ćete otići na stranu za postavku modula: <a href="%s">%s</a>.
NotExistsDirect=Alternativni root folder nije definisan u postojećem folderu.<br>
InfDirAlt=Od verzije 3, moguće je definisati alternativni root folder. Ovo omogućava da sačuvate, u za to namenjen folder, plug-in i prilagođene šablone. <br>Samo napravite folder na root Dolibarr (npr: prilagodjeno). <br>
InfDirExample=<br>Onda ga deklarišite u fajlu <strong>conf.php</strong><br>$dolibarr_main_url_root_alt='/custom'<br>$dolibarr_main_document_root_alt='/path/of/dolibarr/htdocs/custom'<br>Ako su ove linije sa "#"na početku reda kao komentar, da bi ih omogućili samo uklonite oznaku za komentar karakter "#".
GenericMaskCodes=You may enter any numbering mask. In this mask, the following tags can be used:<br><b>{000000}</b> corresponds to a number which will be incremented on each %s. Enter as many zeros as the desired length of the counter. The counter will be completed by zeros from the left in order to have as many zeros as the mask. <br><b>{000000+000}</b> same as the previous one but an offset corresponding to the number to the right of the + sign is applied starting on the first %s. <br><b>{000000@x}</b> same as the previous one but the counter is reset to zero when month x is reached (x between 1 and 12, or 0 to use the early months of fiscal year defined in your configuration, or 99 to reset to zero every month). If this option is used and x is 2 or higher, then the sequence {yy}{mm} or {yyyy}{mm} is also required. <br><b>{dd}</b> day (01 to 31).<br><b>{mm}</b> month (01 to 12).<br><b>{yy}</b>, <b>{yyyy}</b> or <b>{y}</b> year over 2, 4 or 1 numbers. <br>
GenericMaskCodes2=<b>{cccc}</b> the client code on n characters<br><b>{cccc000}</b> the client code on n characters is followed by a counter dedicated to the customer. This counter dedicated to customer is reset at same time as the global counter.<br><b>{tttt}</b> The code of third party type on n characters (see menu Home - Setup - Dictionary - Types of third parties). If you add this tag, the counter will be different for each type of third party.<br>
GenericMaskCodes3EAN=All other characters in the mask will remain intact (except * or ? in 13th position in EAN13).<br>Spaces are not allowed.<br>In EAN13, the last character after the last } in 13th position should be * or ? . It will be replaced by the calculated key.<br>
GenericMaskCodes4a=<u>Primer na 99. %sTreće strane TheCompany, sa datumom 2007-01-31:</u><br>
GenericMaskCodes4b=<u>Primer na Trećoj strani napravljen 2007-03-01:</u><br>
GenericMaskCodes4c=<u>Primer na Proizvodu napravljen 2007-03-01:</u><br>
GenericMaskCodes5=<b>ABC{yy}{mm}-{000000}</b> će dati <b>ABC0701-000099</b><br><b>{0000+100@1}-ZZZ/{dd}/XXX</b> će dati <b>0199-ZZZ/31/XXX</b><br><b>IN{yy}{mm}-{0000}-{t}</b> će dati <b>IN0701-0099-A</b> ako je tip kompanitje 'Registrovana za porez' sa kodom za tip koji je 'A_RI'
GenericNumRefModelDesc=Vraća prilagođen broj prema definisanoj masci.
ServerAvailableOnIPOrPort=Server je dostupan na adresi <b>%s</b> na portu <b>%s</b>
ServerNotAvailableOnIPOrPort=Server nije dostupan na adresi <b>%s</b> na portu<b>%s</b>
ErrorCantUseRazInStartedYearIfNoYearMonthInMask=Greška, ne možete koristiti opciju @ ako sekvenca {yy}{mm} ili {yyyy}{mm} nije unutar maske.
UMask=UMask parameter za nove fajlove na Unix/Linux/BSD/Mac fajl sistemima.
UMaskExplanation=Ovaj parametar omogućava da definišete dozvole koje se podrazumevano postavljaju na fajlovima koje pravi Dolibarr na serveru (tokom uploada na primer).<br>Mora biti oktalna vrednost (na primer, 0666 znači čitaj i piši za sve).<br>Ovaj parametar je beskoristan na Windows serveru.
SeeWikiForAllTeam=Pogledajte na Wiki strani listu saradnika i njihove organizacije
UseACacheDelay= Odlaganje za keširanje eksport odgovora u sekundama (0 ili prazno da nema keša)
DisableLinkToHelpCenter=Sakriti link "<b>Potrebna pomoć ili podrška</b>" na login strani
DisableLinkToHelp=Sakriti link za online pomoć "<b>%s</b>"
AddCRIfTooLong=Nema automatskog preloma teksta, tekst koji je previše dugačak se neće prikazati na dokumentima. Molimo dodajte prelaz u novi red teksta ako je potrebno.
ConfirmPurge=Da li ste sigurni da želite da izvršite ovo čišćenje?<br>Ovo će trajno obrisati sve data fajlove i neće biti više načina da ih vratite (ECM fajlovi, prikačeni fajlovi...).
MinLength=Minimalna dužina
LanguageFilesCachedIntoShmopSharedMemory=Fajlovi .lang učitani u deljenu memoriju
ListOfDirectoriesForModelGenODT=Lista foldera sa šablonima u OpenDocument formatu.<br><br>Staviti apsolutnu putanju foldera.<br>Svaki folder u listi mora biti na novoj liniji.<br>Da biste dodali folder GED modulu, ubacite ga ovde <b>DOL_DATA_ROOT/ecm/ime_vaseg_foldera</b>.<br><br>Fajlovi u tim folderima moraju imati ekstenziju <b>.odt</b> ili <b>.ods</b>.
NumberOfModelFilesFound=Broj ODT/ODS šablona pronađenih u ovim folderima
FollowingSubstitutionKeysCanBeUsed=<br>Da bi znali kako da kreirate vaše šablone odt dokumenata, pre čuvanja u ovim folderima, pročitajte Wiki dokumentaciju:
DescWeather=Sledeće slike će biti prikazane na komandnoj tabli kada broj kasnih akcija dostigne sledeću vrednost:
KeyForWebServicesAccess=Ključ za korišćenje Web Servisa (parameter "dolibarrkey" unutar webservices)
TestSubmitForm=Forma testa unosa
ThisForceAlsoTheme=Korišćenjem ovog menadžera menija će se koristiti i njegova tema bez obzira na izbor korisnika. Takođe ovaj menadžer menija specijalizovan za mobilne telefone ne radi za sve modele mobilnih telefona. Koristite drugi menadžer menija ako iskusite problema sa vašim.
ThemeDir=Folder skinova
ConnectionTimeout=Isteklo vreme predviđeno za vezu
ResponseTimeout=Isteklo vreme predviđeno za odgovor
SmsTestMessage=Test poruka od __PHONEFROM__ za __PHONETO__
NoSmsEngine=Ne postoji dostupan menadžer slanja SMS. Menadžer slanja SMS nije instaliran sa podrazumevanom distribucijom jer zavise od spoljnog dobavljača, ali možete neke pronaći na %s
ComputedFormulaDesc=You can enter here a formula using other properties of object or any PHP coding to get a dynamic computed value. You can use any PHP compatible formulas including the "?" condition operator, and following global object: <strong>$db, $conf, $langs, $mysoc, $user, $object</strong>.<br><strong>WARNING</strong>: Only some properties of $object may be available. If you need a properties not loaded, just fetch yourself the object into your formula like in the second example.<br>Using a computed field means you can't enter yourself any value from interface. Also, if there is a syntax error, the formula may return nothing.<br><br>Example of formula:<br>$object->id < 10 ? round($object->id / 2, 2): ($object->id + 2 * $user->id) * (int) substr($mysoc->zip, 1, 2)<br><br>Example to reload object<br>(($reloadedobj = new Societe($db)) && ($reloadedobj->fetchNoCompute($obj->id ? $obj->id: ($obj->rowid ? $obj->rowid: $object->id)) > 0)) ? $reloadedobj->array_options['options_extrafieldkey'] * $reloadedobj->capital / 5: '-1'<br><br>Other example of formula to force load of object and its parent object:<br>(($reloadedobj = new Task($db)) && ($reloadedobj->fetchNoCompute($object->id) > 0) && ($secondloadedobj = new Project($db)) && ($secondloadedobj->fetchNoCompute($reloadedobj->fk_project) > 0)) ? $secondloadedobj->ref: 'Parent project not found'
ComputedpersistentDesc=Computed extra fields will be stored in the database, however, the value will only be recalculated when the object of this field is changed. If the computed field depends on other objects or global data this value might be wrong!!
ExtrafieldParamHelpPassword=Leaving this field blank means this value will be stored without encryption (field must be only hidden with star on screen).<br>Set 'auto' to use the default encryption rule to save password into database (then value read will be the hash only, no way to retrieve original value)
ExtrafieldParamHelpselect=List of values must be lines with format key,value (where key can't be '0')<br><br> for example: <br>1,value1<br>2,value2<br>code3,value3<br>...<br><br>In order to have the list depending on another complementary attribute list:<br>1,value1|options_<i>parent_list_code</i>:parent_key<br>2,value2|options_<i>parent_list_code</i>:parent_key <br><br>In order to have the list depending on another list:<br>1,value1|<i>parent_list_code</i>:parent_key<br>2,value2|<i>parent_list_code</i>:parent_key
ExtrafieldParamHelpcheckbox=Lista vrednosti moraju biti linije sa formatom ključ,vrednost (gde ključ ne može biti '0')<br><br>na primer: <br>1,value1<br>2,value2<br>3,value3<br>...
ExtrafieldParamHelpradio=Lista vrednosti moraju biti linije sa formatom ključ,vrednost (gde ključ ne može biti '0')<br><br>na primer: <br>1,value1<br>2,value2<br>3,value3<br>...
ExtrafieldParamHelpsellist=List of values comes from a table<br>Syntax: table_name:label_field:id_field::filtersql<br>Example: c_typent:libelle:id::filtersql<br><br>- id_field is necessarly a primary int key<br>- filtersql is a SQL condition. It can be a simple test (eg active=1) to display only active value<br>You can also use $ID$ in filter which is the current id of current object<br>To use a SELECT into the filter use the keyword $SEL$ to bypass anti-injection protection.<br>if you want to filter on extrafields use syntax extra.fieldcode=... (where field code is the code of extrafield)<br><br>In order to have the list depending on another complementary attribute list:<br>c_typent:libelle:id:options_<i>parent_list_code</i>|parent_column:filter <br><br>In order to have the list depending on another list:<br>c_typent:libelle:id:<i>parent_list_code</i>|parent_column:filter
ExtrafieldParamHelpchkbxlst=List of values comes from a table<br>Syntax: table_name:label_field:id_field::filtersql<br>Example: c_typent:libelle:id::filtersql<br><br>filter can be a simple test (eg active=1) to display only active value<br>You can also use $ID$ in filter witch is the current id of current object<br>To do a SELECT in filter use $SEL$<br>if you want to filter on extrafields use syntax extra.fieldcode=... (where field code is the code of extrafield)<br><br>In order to have the list depending on another complementary attribute list:<br>c_typent:libelle:id:options_<i>parent_list_code</i>|parent_column:filter <br><br>In order to have the list depending on another list:<br>c_typent:libelle:id:<i>parent_list_code</i>|parent_column:filter
ExtrafieldParamHelpSeparator=Keep empty for a simple separator<br>Set this to 1 for a collapsing separator (open by default for new session, then status is kept for each user session)<br>Set this to 2 for a collapsing separator (collapsed by default for new session, then status is kept fore each user session)
LibraryToBuildPDF=Biblioteka koja se koristi za generisanje PDF
LocalTaxDesc=Neke zemlje mogu koristiti dve ili više poreske stope za svaku liniju računa. Ako je ovo slučaj, odaberite tip za drugi i treći porez i njegovu stopu. Mogućnosti su: <br>1: lokalna stopa poreza se postavlja na proizvode i usluge bez PDV (lokalni porez se računa na iznos bez poreza) <br>2: lokalni porez se postavlja na proizvode i usluge uključujući PDV (lokalni porez se računa na sumu + glavni porez) <br>3: lokalni porez se postavlja na proizvode bez PDV (lokalni porez se računa na sumu bez poreza) <br>4: lokalni porez se postavlja na proizvode uključujući PDV (lokalni porez se računa kao suma + glavni porez) <br>5: lokalni porez se postavlja na usluge bez PDV (lokalni porez se računa kao suma bez poreza) <br>6: lokalni porez se postavlja na usluge uključujući PDV (lokalni porez se računa kao suma + porez)
ValueOverwrittenByUserSetup=Upozorenje, ova vrednost može biti prepisana od strane korisnika specifičnom postavkom (svaki korisnik može postaviti svoj ClickToDial url)
ShowDetailsInPDFPageFoot=Add more details into footer, such as company address or manager names (in addition to professional ids, company capital and VAT number).
EnableAndSetupModuleCron=If you want to have this recurring invoice generated automatically, module *%s* must be enabled and correctly setup. Otherwise, generation of invoices must be done manually from this template using the *Create* button. Note that even if you enabled automatic generation, you can still safely launch manual generation. Generation of duplicates for the same period is not possible.
ModuleCompanyCodeCustomerAquarium=%s followed by customer code for a customer accounting code
ModuleCompanyCodeDigitaria=Returns a compound accounting code according to the name of the third party. The code consists of a prefix that can be defined in the first position followed by the number of characters defined in the third party code.
ModuleCompanyCodeCustomerDigitaria=%s followed by the truncated customer name by the number of characters: %s for the customer accounting code.
ModuleCompanyCodeSupplierDigitaria=%s followed by the truncated supplier name by the number of characters: %s for the supplier accounting code.
Use3StepsApproval=By default, Purchase Orders need to be created and approved by 2 different users (one step/user to create and one step/user to approve. Note that if user has both permission to create and approve, one step/user will be enough). You can ask with this option to introduce a third step/user approval, if amount is higher than a dedicated value (so 3 steps will be necessary: 1=validation, 2=first approval and 3=second approval if amount is enough).<br>Set this to empty if one approval (2 steps) is enough, set it to a very low value (0.1) if a second approval (3 steps) is always required.
WarningPHPMail=WARNING: The setup to send emails from the application is using the default generic setup. It is often better to setup outgoing emails to use the email server of your Email Service Provider instead of the default setup for several reasons:
WarningPHPMailA=- Using the server of the Email Service Provider increases the trustability of your email, so it increases the deliverablity without being flagged as SPAM
WarningPHPMailB=- Some Email Service Providers (like Yahoo) do not allow you to send an email from another server than their own server. Your current setup uses the server of the application to send email and not the server of your email provider, so some recipients (the one compatible with the restrictive DMARC protocol), will ask your email provider if they can accept your email and some email providers (like Yahoo) may respond "no" because the server is not theirs, so few of your sent Emails may not be accepted for delivery (be careful also of your email provider's sending quota).
WarningPHPMailC=- Using the SMTP server of your own Email Service Provider to send emails is also interesting so all emails sent from application will also be saved into your "Sent" directory of your mailbox.
WarningPHPMailD=Also, it is therefore recommended to change the sending method of e-mails to the value "SMTP". If you really want to keep the default "PHP" method to send emails, just ignore this warning, or remove it by setting the MAIN_HIDE_WARNING_TO_ENCOURAGE_SMTP_SETUP constant to 1 in Home - Setup - Other.
WarningPHPMail2=If your email SMTP provider need to restrict email client to some IP addresses (very rare), this is the IP address of the mail user agent (MUA) for your ERP CRM application: <strong>%s</strong>.
WarningPHPMailSPF=If the domain name in your sender email address is protected by a SPF record (ask your domain name registar), you must add the following IPs in the SPF record of the DNS of your domain: <strong>%s</strong>.
TheKeyIsTheNameOfHtmlField=This is the name of the HTML field. Technical knowledge is required to read the content of the HTML page to get the key name of a field.
PageUrlForDefaultValues=You must enter the relative path of the page URL. If you include parameters in URL, the default values will be effective if all parameters are set to same value.
PageUrlForDefaultValuesCreate=<br>Example:<br>For the form to create a new third party, it is <strong>%s</strong>.<br>For URL of external modules installed into custom directory, do not include the "custom/", so use path like <strong>mymodule/mypage.php</strong> and not custom/mymodule/mypage.php.<br>If you want default value only if url has some parameter, you can use <strong>%s</strong>
PageUrlForDefaultValuesList=<br>Example:<br>For the page that lists third parties, it is <strong>%s</strong>.<br>For URL of external modules installed into custom directory, do not include the "custom/" so use a path like <strong>mymodule/mypagelist.php</strong> and not custom/mymodule/mypagelist.php.<br>If you want default value only if url has some parameter, you can use <strong>%s</strong>
AlsoDefaultValuesAreEffectiveForActionCreate=Also note that overwritting default values for form creation works only for pages that were correctly designed (so with parameter action=create or presend...)
EnableOverwriteTranslation=Enable usage of overwritten translation
GoIntoTranslationMenuToChangeThis=A translation has been found for the key with this code. To change this value, you must edit it from Home-Setup-translation.
WarningSettingSortOrder=Warning, setting a default sort order may result in a technical error when going on the list page if field is an unknown field. If you experience such an error, come back to this page to remove the default sort order and restore default behavior.
Field=Polje
ProductDocumentTemplates=Document templates to generate product document
FreeLegalTextOnExpenseReports=Free legal text on expense reports
WatermarkOnDraftExpenseReports=Watermark on draft expense reports
DAV_ALLOW_PRIVATE_DIR=Enable the generic private directory (WebDAV dedicated directory named "private" - login required)
DAV_ALLOW_PRIVATE_DIRTooltip=The generic private directory is a WebDAV directory anybody can access with its application login/pass.
DAV_ALLOW_PUBLIC_DIR=Enable the generic public directory (WebDAV dedicated directory named "public" - no login required)
DAV_ALLOW_PUBLIC_DIRTooltip=The generic public directory is a WebDAV directory anybody can access (in read and write mode), with no authorization required (login/password account).
DAV_ALLOW_ECM_DIR=Enable the DMS/ECM private directory (root directory of the DMS/ECM module - login required)
DAV_ALLOW_ECM_DIRTooltip=The root directory where all files are manually uploaded when using the DMS/ECM module. Similarly as access from the web interface, you will need a valid login/password with adecuate permissions to access it.
Module330Desc=Napravite prečice, uvek dostupne, za unutrašnje ili spoljne strane koje često koristite
Module400Name=Projekti ili tragovi
Module400Desc=Menadžment projekata, tragova/mogućnosti i/ili zadataka. Možete takođe zadati bilo koji element (račun, narudžbina, ponuda, intervencija...) u projekat i dobiti transverzalni pregled iz prikaza za projekte
Module410Name=Web kalendar
Module410Desc=Integracija web kalendara
Module500Name=Porezi i specijalni troškovi
Module500Desc=Menadžment drugih troškova (prodajni porez, socijalni ili fiskalni porez, dividende...)
Module600Name=Obaveštenje u slučaju poslovnog događaja
Module600Desc=Poslati email obaveštenje u slučaju poslovnog događaja: prema korisniku (postavke za svakog korisnika), prema kontaktima treće strane (postavke za svaku treću stranu) ili prema specifičnim emailovima
Module600Long=Note that this module sends emails in real-time when a specific business event occurs. If you are looking for a feature to send email reminders for agenda events, go into the setup of module Agenda.
Module2300Desc=Menadžment planiranih poslova (alias cron ili chrono tabela)
Module2400Name=Događaji/agenda
Module2400Desc=Pratite događaje. Logovanje automatskih događaja za praćenje smisla ili beleženje ručnih događaja ili sastanaka. Ovo je glavni modul za Menadžment Odnosa sa Kupcima ili Dobavljačima
Module2500Desc=Sistem menadžmenta dokumenata DMS / Menadžment elektronskog sadržaja ECM. Automatska organizacija vaših generisanih i sačuvanih dokuemenata. Delite ih kada je potrebno.
Module2600Name=API/Web servisi (SOAP server)
Module2600Desc=Omogućiti da Dolibarr SOAP server pruža API servis
Module2660Desc=Enable the Dolibarr web services client (Can be used to push data/requests to external servers. Only Purchase orders are currently supported.)
Module3200Desc=Enable an unalterable log of business events. Events are archived in real-time. The log is a read-only table of chained events that can be exported. This module may be mandatory for some countries.
Module10000Desc=Create websites (public) with a WYSIWYG editor. This is a webmaster or developer oriented CMS (it is better to know HTML and CSS language). Just setup your web server (Apache, Nginx, ...) to point to the dedicated Dolibarr directory to have it online on the internet with your own domain name.
Module50000Desc=Ponudite kupcijam PayBox online stranu za plaćanje (kreditne/debitne kartice). Ovo može biti korišćeno da bi se dozvolilo kupcijam da prave ad-hok plaćanja ili plaćanja prema specifičnim Dolibarr objektima (računi, porudžbine i sl...)
Module50200Desc=Ponudite kupcima stranu za PayPal online plaćanje (PayPal račun ili kreditna/debitna kartica). Ovo može biti korišćeno da dozvolite kupcima da prave ad-hok plaćanja ili plaćanja prema specijalnim Dolibarr objektima (račun, narudžbina i sl...)
Module50300Desc=Offer customers a Stripe online payment page (credit/debit cards). This can be used to allow your customers to make ad-hoc payments or payments related to a specific Dolibarr object (invoice, order etc...)
Module50400Desc=Accounting management (double entries, support General and Subsidiary Ledgers). Export the ledger in several other accounting software formats.
Module54000Desc=Direct print (without opening the documents) using Cups IPP interface (Printer must be visible from server, and CUPS must be installed on server).
Permission262=Extend access to all third parties AND their objects (not only third parties for which the user is a sale representative).<br>Not effective for external users (always limited to themselves for proposals, orders, invoices, contracts, etc.).<br>Not effective for projects (only rules on project permissions, visibility and assignment matters).
Permission263=Extend access to all third parties WITHOUT their objects (not only third parties for which the user is a sale representative).<br>Not effective for external users (always limited to themselves for proposals, orders, invoices, contracts, etc.).<br>Not effective for projects (only rules on project permissions, visibility and assignment matters).
VATIsUsedDesc=By default when creating prospects, invoices, orders etc. the Sales Tax rate follows the active standard rule:<br>If the seller is not subject to Sales tax, then Sales tax defaults to 0. End of rule.<br>If the (seller's country = buyer's country), then the Sales tax by default equals the Sales tax of the product in the seller's country. End of rule.<br>If the seller and buyer are both in the European Community and goods are transport-related products (haulage, shipping, airline), the default VAT is 0. This rule is dependant on the seller's country - please consult with your accountant. The VAT should be paid by the buyer to the customs office in their country and not to the seller. End of rule.<br>If the seller and buyer are both in the European Community and the buyer is not a company (with a registered intra-Community VAT number) then the VAT defaults to the VAT rate of the seller's country. End of rule.<br>If the seller and buyer are both in the European Community and the buyer is a company (with a registered intra-Community VAT number), then the VAT is 0 by default. End of rule.<br>In any other case the proposed default is Sales tax=0. End of rule.
VATIsNotUsedDesc=By default the proposed Sales tax is 0 which can be used for cases like associations, individuals or small companies.
VATIsUsedExampleFR=In France, it means companies or organizations having a real fiscal system (Simplified real or normal real). A system in which VAT is declared.
VATIsNotUsedExampleFR=In France, it means associations that are non Sales tax declared or companies, organizations or liberal professions that have chosen the micro enterprise fiscal system (Sales tax in franchise) and paid a franchise Sales tax without any Sales tax declaration. This choice will display the reference "Non applicable Sales tax - art-293B of CGI" on invoices.
LocalTax1IsUsedDescES=The RE rate by default when creating prospects, invoices, orders etc. follow the active standard rule:<br>If the buyer is not subjected to RE, RE by default=0. End of rule.<br>If the buyer is subjected to RE then the RE by default. End of rule.<br>
LocalTax1IsNotUsedDescES=By default the proposed RE is 0. End of rule.
LocalTax1IsUsedExampleES=In Spain they are professionals subject to some specific sections of the Spanish IAE.
LocalTax1IsNotUsedExampleES=In Spain they are professional and societies and subject to certain sections of the Spanish IAE.
LocalTax2ManagementES=IRPF Management
LocalTax2IsUsedDescES=The IRPF rate by default when creating prospects, invoices, orders etc. follow the active standard rule:<br>If the seller is not subjected to IRPF, then IRPF by default=0. End of rule.<br>If the seller is subjected to IRPF then the IRPF by default. End of rule.<br>
LocalTax2IsNotUsedDescES=By default the proposed IRPF is 0. End of rule.
LocalTax2IsUsedExampleES=In Spain, freelancers and independent professionals who provide services and companies who have chosen the tax system of modules.
LocalTax2IsNotUsedExampleES=In Spain they are businesses not subject to tax system of modules.
RevenueStampDesc=The "tax stamp" or "revenue stamp" is a fixed tax you per invoice (It does not depend on amount of invoice). It can also be a percent tax but using the second or third type of tax is better for percent taxes as tax stamps does not provide any reporting. Only few countries uses this type of tax.
LogoDesc=Main logo of company. Will be used into generated documents (PDF, ...)
LogoSquarred=Logo (squarred)
LogoSquarredDesc=Must be a squarred icon (width = height). This logo will be used as the favorite icon or other need like for the top menu bar (if not disabled into display setup).
ShowBugTrackLink=Show the link "<strong>%s</strong>"
ShowBugTrackLinkDesc=Keep empty to not display this link, use value 'github' for the link to the Dolibarr project or define directly an url 'https://...'
SetupDescription3=<a href="%s">%s -> %s</a><br><br>Basic parameters used to customize the default behavior of your application (e.g for country-related features).
SetupDescription4=<a href="%s">%s -> %s</a><br><br>This software is a suite of many modules/applications. The modules related to your needs must be enabled and configured. Menu entries will appears with the activation of these modules.
SetupDescription3b=Basic parameters used to customize the default behavior of your application (e.g for country-related features).
SetupDescription4b=This software is a suite of many modules/applications. The modules related to your needs must be enabled and configured. Menu entries will appears with the activation of these modules.
LogEventDesc=Enable logging for specific security events. Administrators the log via menu <b>%s - %s</b>. Warning, this feature can generate a large amount of data in the database.
SessionExplanation=This number guarantees that the session will never expire before this delay, if the session cleaner is done by Internal PHP session cleaner (and nothing else). Internal PHP session cleaner does not guarantee that the session will expire after this delay. It will expire, after this delay, and when the session cleaner is run, so every <b>%s/%s</b> access, but only during access made by other sessions (if value is 0, it means clearing of session is done only by an external process).<br>Note: on some servers with an external session cleaning mechanism (cron under debian, ubuntu ...), the sessions can be destroyed after a period defined by an external setup, no matter what the value entered here is.
SessionsPurgedByExternalSystem=Sessions on this server seems to be cleaned by an external mechanism (cron under debian, ubuntu ...), probably every <b>%s</b> seconds (= value of parameter <b>session.gc_maxlifetime</b>), so changing the value here has no effect. You must ask the server administrator to change session delay.
TriggersDesc=Triggers are files that will modify the behavior of Dolibarr workflow once copied into the directory <b>htdocs/core/triggers</b>. They realize new actions, activated on Dolibarr events (new company creation, invoice validation, ...).
ConstDesc=This page allows you to edit (override) parameters not available in other pages. These are mostly reserved parameters for developers/advanced troubleshooting only.
MAIN_MAX_DECIMALS_UNIT=Max. decimals for unit prices
MAIN_MAX_DECIMALS_TOT=Max. decimals for total prices
MAIN_MAX_DECIMALS_SHOWN=Max. decimals for prices <b>shown on screen</b>. Add an ellipsis <b>...</b> after this parameter (e.g. "2...") if you want to see "<b>...</b>" suffixed to the truncated price.
MAIN_ROUNDING_RULE_TOT=Step of rounding range (for countries where rounding is done on something other than base 10. For example, put 0.05 if rounding is done by 0.05 steps)
BackupDesc2=Backup the contents of the "documents" directory (<b>%s</b>) containing all uploaded and generated files. This will also include all the dump files generated in Step 1. This operation may last several minutes.
RestoreDesc=To restore a Dolibarr backup, two steps are required.
RestoreDesc2=Restore the backup file (zip file for example) of the "documents" directory to a new Dolibarr installation or into this current documents directory (<b>%s</b>).
RestoreDesc3=Restore the database structure and data from a backup dump file into the database of the new Dolibarr installation or into the database of this current installation (<b>%s</b>). Warning, once the restore is complete, you must use a login/password, that existed from the backup time/installation to connect again.<br>To restore a backup database into this current installation, you can follow this assistant.
YouMustRunCommandFromCommandLineAfterLoginToUser=You must run this command from command line after login to a shell with user <b>%s</b> or you must add -W option at end of command line to provide <b>%s</b> password.
YourPHPDoesNotHaveSSLSupport=SSL functions not available in your PHP
SimpleNumRefModelDesc=Returns the reference number in the format %syymm-nnnn where yy is the year, mm is the month and nnnn is a sequential auto-incrementing number with no reset
ProxyDesc=Some features of Dolibarr require internet access. Define here the internet connection parameters such as access through a proxy server if necessary.
ExternalAccess=External/Internet Access
MAIN_PROXY_USE=Use a proxy server (otherwise access is direct to the internet)
ExtraFieldHasWrongValue=Attribute %s has a wrong value.
AlphaNumOnlyLowerCharsAndNoSpace=only alphanumericals and lower case characters without space
SendmailOptionNotComplete=Warning, on some Linux systems, to send email from your email, sendmail execution setup must contains option -ba (parameter mail.force_extra_parameters into your php.ini file). If some recipients never receive emails, try to edit this PHP parameter with mail.force_extra_parameters = -ba).
SendmailOptionMayHurtBuggedMTA=Feature to send mails using method "PHP mail direct" will generate a mail message that might not be parsed correctly by some receiving mail servers. The result is that some mails can't be read by people hosted by those bugged platforms. This is the case for some Internet providers (Ex: Orange in France). This is not a problem with Dolibarr or PHP but with the receiving mail server. You can however add an option MAIN_FIX_FOR_BUGGED_MTA to 1 in Setup - Other to modify Dolibarr to avoid this. However, you may experience problems with other servers that strictly use the SMTP standard. The other solution (recommended) is to use the method "SMTP socket library" which has no disadvantages.
TranslationDesc=How to set the display language:<br>* Default/Systemwide: menu <strong>Home -> Setup -> Display</strong><br>* Per user: Click on the username at the top of the screen and modify the <strong>User Display Setup</strong> tab on the user card.
TranslationOverwriteDesc=You can also override strings filling the following table. Choose your language from "%s" dropdown, insert the translation key string into "%s" and your new translation into "%s"
OnlyFollowingModulesAreOpenedToExternalUsers=Note, only the following modules are available to external users (irrespective of the permissions of such users) and only if permissions are granted:<br>
YouHaveXObjectUseComboOptim=You have %s %s in the database. You can go into setup of module to enable loading of combo list on key pressed event.
YouHaveXObjectUseSearchOptim=You have %s %s in the database. You can add the constant %s to 1 in Home-Setup-Other.
YouHaveXObjectUseSearchOptimDesc=This limits the search to the beginning of strings which makes it possible for the database to use indexes and you should get an immediate response.
YouHaveXObjectAndSearchOptimOn=You have %s %s in the database and constant %s is set to %s in Home-Setup-Other.
BrowserIsOK=You are using the %s web browser. This browser is ok for security and performance.
BrowserIsKO=You are using the %s web browser. This browser is known to be a bad choice for security, performance and reliability. We recommend using Firefox, Chrome, Opera or Safari.
AddRefInList=Display Customer/Vendor ref. into combo lists.<br>Third Parties will appear with a name format of "CC12345 - SC45678 - The Big Company corp." instead of "The Big Company corp".
AddVatInList=Display Customer/Vendor VAT number into combo lists.
AddAdressInList=Display Customer/Vendor adress into combo lists.<br>Third Parties will appear with a name format of "The Big Company corp. - 21 jump street 123456 Big town - USA" instead of "The Big Company corp".
AddEmailPhoneTownInContactList=Display Contact email (or phones if not defined) and town info list (select list or combobox)<br>Contacts will appear with a name format of "Dupond Durand - dupond.durand@email.com - Paris" or "Dupond Durand - 06 07 59 65 66 - Paris" instead of "Dupond Durand".
PasswordGenerationStandard=Return a password generated according to internal Dolibarr algorithm: %s characters containing shared numbers and characters in lowercase.
UserHideInactive=Hide inactive users from all combo lists of users (Not recommended: this may means you won't be able to filter or search on old users on some pages)
WebDAVSetupDesc=This is the link to access the WebDAV directory. It contains a "public" dir open to any user knowing the URL (if public directory access allowed) and a "private" directory that needs an existing login account/password for access.
VisitorCanChooseItsPaymentMode=Visitor can choose from available payment modes
MEMBER_REMINDER_EMAIL=Enable automatic reminder <b>by email</b> of expired subscriptions. Note: Module <strong>%s</strong> must be enabled and correctly setup to send reminders.
LDAPDescValues=Example values are designed for <b>OpenLDAP</b> with following loaded schemas: <b>core.schema, cosine.schema, inetorgperson.schema</b>). If you use thoose values and OpenLDAP, modify your LDAP config file <b>slapd.conf</b> to have all thoose schemas loaded.
ForANonAnonymousAccess=For an authenticated access (for a write access for example)
MemcachedNotAvailable=No applicative cache found. You can enhance performance by installing a cache server Memcached and a module able to use this cache server.<br>More information here <a href="http://wiki.dolibarr.org/index.php/Module_MemCached_EN">http://wiki.dolibarr.org/index.php/Module_MemCached_EN</a>.<br>Note that a lot of web hosting provider does not provide such cache server.
MemcachedModuleAvailableButNotSetup=Module memcached for applicative cache found but setup of module is not complete.
MemcachedAvailableAndSetup=Module memcached dedicated to use memcached server is enabled.
NoOPCodeCacheFound=No OPCode cache found. Maybe you are using an OPCode cache other than XCache or eAccelerator (good), or maybe you don't have OPCode cache (very bad).
DefaultValuesDesc=Here you may define the default value you wish to use when creating a new record, and/or default filters or the sort order when you list records.
DefaultCreateForm=Default values (to use on forms)
OnProductSelectAddProductDesc=How to use the description of the products when adding a product as a line of a document
AutoFillFormFieldBeforeSubmit=Auto fill the description input field with the description of product
DoNotAutofillButAutoConcat=Do not autofill the input field with description of product. Description of the product will be concatenated to the entered description automatically.
DoNotUseDescriptionOfProdut=Description of the product will never be included into the description of lines of documents
MergePropalProductCard=Activate in product/service Attached Files tab an option to merge product PDF document to proposal PDF azur if product/service is in the proposal
ViewProductDescInThirdpartyLanguageAbility=Display products descriptions in forms in the language of the third party (otherwise in the language of the user)
UseSearchToSelectProductTooltip=Also if you have a large number of products (> 100 000), you can increase speed by setting constant PRODUCT_DONOTSEARCH_ANYWHERE to 1 in Setup->Other. Search will then be limited to start of string.
UseSearchToSelectProduct=Wait until you press a key before loading content of product combo list (This may increase performance if you have a large number of products, but it is less convenient)
YouCanUseDOL_DATA_ROOT=You can use DOL_DATA_ROOT/dolibarr.log for a log file in Dolibarr "documents" directory. You can set a different path to store this file.
ErrorUnknownSyslogConstant=Constant %s is not a known Syslog constant
DonationsReceiptModel=Template of donation receipt
##### Barcode #####
BarcodeSetup=Barcode setup
PaperFormatModule=Print format module
BarcodeEncodeModule=Barcode encoding type
CodeBarGenerator=Barcode generator
ChooseABarCode=No generator defined
FormatNotSupportedByGenerator=Format not supported by this generator
BarcodeDescEAN8=Barcode of type EAN8
BarcodeDescEAN13=Barcode of type EAN13
BarcodeDescUPC=Barcode of type UPC
BarcodeDescISBN=Barcode of type ISBN
BarcodeDescC39=Barcode of type C39
BarcodeDescC128=Barcode of type C128
BarcodeDescDATAMATRIX=Barcode of type Datamatrix
BarcodeDescQRCODE=Barcode of type QR code
GenbarcodeLocation=Bar code generation command line tool (used by internal engine for some bar code types). Must be compatible with "genbarcode".<br>For example: /usr/local/bin/genbarcode
BarcodeInternalEngine=Internal engine
BarCodeNumberManager=Manager to auto define barcode numbers
NoNeedForDeliveryReceipts=In most cases, shipping sheets are used both as sheets for customer deliveries (list of products to send) and sheets that are received and signed by customer. Hence the product deliveries receipt is a duplicated feature and is rarely activated.
FCKeditorForProductDetails=WYSIWIG creation/edition of products details lines for all entities (proposals, orders, invoices, etc...). <span class="warning">Warning: Using this option for this case is seriously not recommended as it can create problems with special characters and page formatting when building PDF files.</span>
IfYouUsePointOfSaleCheckModule=If you use the Point of Sale module (POS) provided by default or an external module, this setup may be ignored by your POS module. Most POS modules are designed by default to create an invoice immediately and decrease stock irrespective of the options here. So if you need or not to have a stock decrease when registering a sale from your POS, check also your POS module setup.
AGENDA_REMINDER_BROWSER=Enable event reminder <b>on user's browser</b> (When remind date is reached, a popup is shown by the browser. Each user can disable such notifications from its browser notification setup).
ClickToDialUrlDesc=Url called when a click on phone picto is done. In URL, you can use tags<br><b>__PHONETO__</b> that will be replaced with the phone number of person to call<br><b>__PHONEFROM__</b> that will be replaced with phone number of calling person (yours)<br><b>__LOGIN__</b> that will be replaced with clicktodial login (defined on user card)<br><b>__PASS__</b> that will be replaced with clicktodial password (defined on user card).
ClickToDialDesc=This module change phone numbers, when using a desktop computer, into clickable links. A click will call the number. This can be used to start the phone call when using a soft phone on your desktop or when using a CTI system based on SIP protocol for example. Note: When using a smartphone, phone numbers are always clickable.
ClickToDialUseTelLinkDesc=Use this method if your users have a softphone or a software interface, installed on the same computer as the browser, and called when you click on a link starting with "tel:" in your browser. If you need a link that start with "sip:" or a full server solution (no need of local software installation), you must set this to "No" and fill the next field.
CashDeskDoNotDecreaseStock=Disable stock decrease when a sale is done from Point of Sale (if "no", stock decrease is done for each sale done from POS, irrespective of the option set in module Stock).
StockDecreaseForPointOfSaleDisabledbyBatch=Stock decrease in POS is not compatible with module Serial/Lot management (currently active) so stock decrease is disabled.
WarningAPIExplorerDisabled=The API explorer has been disabled. API explorer is not required to provide API services. It is a tool for developer to find/test REST APIs. If you need this tool, go into setup of module API REST to activate it.
PathToGeoIPMaxmindCountryDataFile=Path to file containing Maxmind ip to country translation.<br>Examples:<br>/usr/local/share/GeoIP/GeoIP.dat<br>/usr/share/GeoIP/GeoIP.dat<br>/usr/share/GeoIP/GeoLite2-Country.mmdb
NoteOnPathLocation=Note that your ip to country data file must be inside a directory your PHP can read (Check your PHP open_basedir setup and filesystem permissions).
YouCanDownloadFreeDatFileTo=You can download a <b>free demo version</b> of the Maxmind GeoIP country file at %s.
YouCanDownloadAdvancedDatFileTo=You can also download a more <b>complete version, with updates,</b> of the Maxmind GeoIP country file at %s.
TestGeoIPResult=Test of a conversion IP -> country
UseSearchToSelectProject=Wait until a key is pressed before loading content of Project combo list.<br>This may improve performance if you have a large number of projects, but it is less convenient.
MAIN_APPLICATION_TITLE=Force visible name of application (warning: setting your own name here may break autofill login feature when using DoliDroid mobile application)
NbMajMin=Minimum number of uppercase characters
NbNumMin=Minimum number of numeric characters
NbSpeMin=Minimum number of special characters
NbIteConsecutive=Maximum number of repeating same characters
NoAmbiCaracAutoGeneration=Do not use ambiguous characters ("1","l","i","|","0","O") for automatic generation
YouMayFindNotificationsFeaturesIntoModuleNotification=You may find options for email notifications by enabling and configuring the module "Notification".
InstallModuleFromWebHasBeenDisabledByFile=Install of external module from application has been disabled by your administrator. You must ask him to remove the file <strong>%s</strong> to allow this feature.
ConfFileMustContainCustom=Installing or building an external module from application need to save the module files into directory <strong>%s</strong>. To have this directory processed by Dolibarr, you must setup your <strong>conf/conf.php</strong> to add the 2 directive lines:<br><strong>$dolibarr_main_url_root_alt='/custom';</strong><br><strong>$dolibarr_main_document_root_alt='%s/custom';</strong>
UnicodeCurrency=Enter here between braces, list of byte number that represent the currency symbol. For example: for $, enter [36] - for brazil real R$ [82,36] - for €, enter [8364]
PictoHelp=Icon name in format:<br>- image.png for an image file into the current theme directory<br>- image.png@module if file is into the directory /img/ of a module<br>- fa-xxx for a FontAwesome fa-xxx picto<br>- fonwtawesome_xxx_fa_color_size for a FontAwesome fa-xxx picto (with prefix, color and size set)
UrlTrackingDesc=If the provider or transport service offers a page or web site to check the status of your shipments, you may enter it here. You can use the key {TRACKID} in the URL parameters so the system will replace it with the tracking number the user entered into the shipment card.
OpportunityPercent=When you create a lead, you will define an estimated amount of project/lead. According to status of the lead, this amount may be multiplied by this rate to evaluate a total amount all your leads may generate. Value is a percentage (between 0 and 100).
TemplateForElement=This mail template is related to what type of object? An email template is available only when using the "Send Email" button from the related object.
ExampleOfNewsMessageForMajorRelease=Dolibarr ERP & CRM %s is available. Version %s is a major release with a lot of new features for both users and developers. You can download it from the download area of https://www.dolibarr.org portal (subdirectory Stable versions). You can read <a href="https://github.com/Dolibarr/dolibarr/blob/develop/ChangeLog">ChangeLog</a> for complete list of changes.
ExampleOfNewsMessageForMaintenanceRelease=Dolibarr ERP & CRM %s is available. Version %s is a maintenance version, so contains only bug fixes. We recommend all users to upgrade to this version. A maintenance release does not introduce new features or changes to the database. You may download it from the download area of https://www.dolibarr.org portal (subdirectory Stable versions). You can read the <a href="https://github.com/Dolibarr/dolibarr/blob/develop/ChangeLog">ChangeLog</a> for complete list of changes.
MultiPriceRuleDesc=When option "Several levels of prices per product/service" is enabled, you can define different prices (one per price level) for each product. To save you time, here you may enter a rule to autocalculate a price for each level based on the price of the first level, so you will have to only enter a price for the first level for each product. This page is designed to save you time but is useful only if your prices for each level are relative to first level. You can ignore this page in most cases.
UrlToGetKeyToUseAPIs=Url to get token to use API (once token has been received it is saved in database user table and must be provided on each API call)
activateModuleDependNotSatisfied=Module "%s" depends on module "%s", that is missing, so module "%1$s" may not work correctly. Please install module "%2$s" or disable module "%1$s" if you want to be safe from any surprise
CommandIsNotInsideAllowedCommands=The command you are trying to run is not in the list of allowed commands defined in parameter <strong>$dolibarr_main_restrict_os_commands</strong> in the <strong>conf.php</strong> file.
SamePriceAlsoForSharedCompanies=If you use a multicompany module, with the choice "Single price", the price will also be the same for all companies if products are shared between environments
ModuleEnabledAdminMustCheckRights=Module has been activated. Permissions for activated module(s) were given to admin users only. You may need to grant permissions to other users or groups manually if necessary.
UserHasNoPermissions=This user has no permissions defined
TypeCdr=Use "None" if the date of payment term is date of invoice plus a delta in days (delta is field "%s")<br>Use "At end of month", if, after delta, the date must be increased to reach the end of month (+ an optional "%s" in days)<br>Use "Current/Next" to have payment term date being the first Nth of the month after delta (delta is field "%s", N is stored into field "%s")
WarningNoteModuleInvoiceForFrenchLaw=This module %s is compliant with French laws (Loi Finance 2016).
WarningNoteModulePOSForFrenchLaw=This module %s is compliant with French laws (Loi Finance 2016) because module Non Reversible Logs is automatically activated.
WarningInstallationMayBecomeNotCompliantWithLaw=You are trying to install module %s that is an external module. Activating an external module means you trust the publisher of that module and that you are sure that this module does not adversely impact the behavior of your application, and is compliant with laws of your country (%s). If the module introduces an illegal feature, you become responsible for the use of illegal software.
GDPRContactDesc=If you store personal data in your Information System, you can name the contact who is responsible for the General Data Protection Regulation here
VATIsUsedIsOff=Note: The option to use Sales Tax or VAT has been set to <strong>Off</strong> in the menu %s - %s, so Sales tax or Vat used will always be 0 for sales.
FeatureSupportedOnTextFieldsOnly=Warning, feature supported on text fields and combo lists only. Also an URL parameter action=create or action=edit must be set OR page name must end with 'new.php' to trigger this feature.
EmailCollectorDescription=Add a scheduled job and a setup page to scan regularly email boxes (using IMAP protocol) and record emails received into your application, at the right place and/or create some records automatically (like leads).
TokenMustHaveBeenCreated=Module OAuth2 must be enabled and an oauth2 token must have been created with the correct permissions (for example scope "gmail_full" with OAuth for Gmail).
EmailCollectorConfirmCollect=Do you want to run this collector now?
EmailCollectorExampleToCollectTicketRequestsDesc=Collect emails that match some rules and create automatically a ticket (Module Ticket must be enabled) with the email informations. You can use this collector if you provide some support by email, so your ticket request will be automatically generated. Activate also Collect_Responses to collect answers of your client directly on the ticket view (you must reply from Dolibarr).
EmailCollectorExampleToCollectTicketRequests=Example collecting the ticket request (first message only)
EmailCollectorExampleToCollectAnswersFromExternalEmailSoftwareDesc=Scan your mailbox "Sent" directory to find emails that was sent as an answer of another email directly from your email software and not from Dolibarr. If such an email is found, the event of answer is recorded into Dolibarr
EmailCollectorExampleToCollectAnswersFromExternalEmailSoftware=Example collecting e-mail answers sent from an external e-mail software
EmailCollectorExampleToCollectDolibarrAnswersDesc=Collect all emails that are an answer of an email sent from your application. An event (Module Agenda must be enabled) with the email response will be recorded at the good place. For example, if you send a commercial proposal, order, invoice or message for a ticket by email from the application, and the recipient answers your email, the system will automatically catch the answer and add it into your ERP.
EmailCollectorExampleToCollectDolibarrAnswers=Example collecting all ingoing messages being answers to messages sent from Dolibarr'
EmailCollectorExampleToCollectLeadsDesc=Collect emails that match some rules and create automatically a lead (Module Project must be enabled) with the email informations. You can use this collector if you want to follow your lead using the module Project (1 lead = 1 project), so your leads will be automatically generated. If the collector Collect_Responses is also enabled, when you send an email from your leads, proposals or any other object, you may also see answers of your customers or partners directly on the application.<br>Note: With this initial example, the title of the lead is generated including the email. If the thirdparty can't be found in database (new customer), the lead will be attached to the thirdparty with ID 1.
EmailCollectorExampleToCollectJobCandidaturesDesc=Collect emails applying to job offers (Module Recruitment must be enabled). You can complete this collector if you want to automatically create a candidature for a job request. Note: With this initial example, the title of the candidature is generated including the email.
EmailCollectorExampleToCollectJobCandidatures=Example collecting job candidatures received by e-mail
CreateTicketAndThirdParty=Create a ticket (linked to a third party if the third party was loaded by a previous operation or was guessed from a tracker in email header, without third party otherwise)
OperationParamDesc=Define the rules to use to extract some data or set values to use for operation.<br><br>Example to extract a company name from email subject into a temporary variable:<br>tmp_var=EXTRACT:SUBJECT:Message from company ([^\n]*)<br><br>Examples to set the properties of an object to create:<br>objproperty1=SET:a hard coded value<br>objproperty2=SET:__tmp_var__<br>objproperty3=SETIFEMPTY:a value (value is set only if property is not already defined)<br>objproperty4=EXTRACT:HEADER:X-Myheaderkey:\\s*([^\\s]*)<br>options_myextrafield1=EXTRACT:SUBJECT:([^\n]*)<br>object.objproperty5=EXTRACT:BODY:My company name is\\s([^\\s]*)<br><br>Use a ; char as separator to extract or set several properties.
MAIN_OPTIMIZEFORCOLORBLIND=Change interface's color for color blind person
MAIN_OPTIMIZEFORCOLORBLINDDesc=Enable this option if you are a color blind person, in some case interface will change color setup to increase contrast.
ThisValueCanOverwrittenOnUserLevel=This value can be overwritten by each user from its user page - tab '%s'
DefaultCustomerType=Default thirdparty type for "New customer" creation form
ABankAccountMustBeDefinedOnPaymentModeSetup=Note: The bank account must be defined on the module of each payment mode (Paypal, Stripe, ...) to have this feature working.
RootCategoryForProductsToSell=Root category of products to sell
RootCategoryForProductsToSellDesc=If defined, only products inside this category or childs of this category will be available in the Point Of Sale
DebugBar=Debug Bar
DebugBarDesc=Toolbar that comes with a plenty of tools to simplify debugging
DebugBarSetup=DebugBar Setup
GeneralOptions=General Options
LogsLinesNumber=Number of lines to show on logs tab
UseDebugBar=Use the debug bar
DEBUGBAR_LOGS_LINES_NUMBER=Number of last log lines to keep in console
ModuleActivatedWithTooHighLogLevel=Module %s is activated with a too high logging level (try to use a lower level for better performances and security)
IfTrackingIDFoundEventWillBeLinked=Note that If a tracking ID of an object is found into email, or if the email is an answer of an email aready collected and linked to an object, the created event will be automatically linked to the known related object.
WithGMailYouCanCreateADedicatedPassword=With a GMail account, if you enabled the 2 steps validation, it is recommanded to create a dedicated second password for the application instead of using your own account passsword from https://myaccount.google.com/.
EmailCollectorTargetDir=It may be a desired behaviour to move the email into another tag/directory when it was processed successfully. Just set name of directory here to use this feature (Do NOT use special characters in name). Note that you must also use a read/write login account.
EmailCollectorLoadThirdPartyHelp=You can use this action to use the email content to find and load an existing thirdparty in your database. The found (or created) thirdparty will be used for following actions that need it.<br>For example, if you want to create a thirdparty with a name extracted from a string 'Name: name to find' present into the body, use the sender email as email, you can set the parameter field like this:<br>'email=HEADER:^From:(.*);name=EXTRACT:BODY:Name:\\s([^\\s]*);client=SET:2;'<br>
BaseOnSabeDavVersion=Based on the library SabreDAV version
NotAPublicIp=Not a public IP
MakeAnonymousPing=Make an anonymous Ping '+1' to the Dolibarr foundation server (done 1 time only after installation) to allow the foundation to count the number of Dolibarr installation.
PDF_USE_ALSO_LANGUAGE_CODE=If you want to have some texts in your PDF duplicated in 2 different languages in the same generated PDF, you must set here this second language so generated PDF will contains 2 different languages in same page, the one chosen when generating PDF and this one (only few PDF templates support this). Keep empty for 1 language per PDF.
FafaIconSocialNetworksDesc=Enter here the code of a FontAwesome icon. If you don't know what is FontAwesome, you can use the generic value fa-address-book.
MeasuringUnitTypeDesc=Use here a value like "size", "surface", "volume", "weight", "time"
MeasuringScaleDesc=The scale is the number of places you have to move the decimal part to match the default reference unit. For "time" unit type, it is the number of seconds. Values between 80 and 99 are reserved values.
TemplateforBusinessCards=Template for a business card in different size
InventorySetup= Inventory Setup
ExportUseLowMemoryMode=Use a low memory mode
ExportUseLowMemoryModeHelp=Use the low memory mode to execute the exec of the dump (compression is done through a pipe instead of into the PHP memory). This method does not allow to check that file is completed and error message can't be reported if it fails.
DEBUGBAR_USE_LOG_FILE=Use the <b>dolibarr.log</b> file to trap Logs
UsingLogFileShowAllRecordOfSubrequestButIsSlower=Use the dolibarr.log file to trap Logs instead of live memory catching. It allows to catch all logs instead of only log of current process (so including the one of ajax subrequests pages) but will make your instance very very slow. Not recommended.
FixedOrPercent=Fixed (use keyword 'fixed') or percent (use keyword 'percent')
DefaultOpportunityStatus=Default opportunity status (first status when lead is created)
CIDLookupURL=The module brings an URL that can be used by an external tool to get the name of a thirdparty or contact from its phone number. URL to use is:
OauthNotAvailableForAllAndHadToBeCreatedBefore=OAUTH2 authentication is not available for all hosts, and a token with the right permissions must have been created upstream with the OAUTH module
MAIN_MAIL_SMTPS_OAUTH_SERVICE=OAUTH2 authentication service
DontForgetCreateTokenOauthMod=A token with the right permissions must have been created upstream with the OAUTH module
MAIN_MAIL_SMTPS_AUTH_TYPE=Authentification method
UsePassword=Use a password
UseOauth=Use a OAUTH token
Images=Images
MaxNumberOfImagesInGetPost=Max number of images allowed in a HTML field submitted in a form
